About Guild Design Build
Guild Design Build is a Cape Cod design-build contractor run by Rick Conway and based in Pocasset, a village of Bourne. It's the same team as Cape Cod Carpentry Guild Inc., with state HIC registration #210736. Rick holds Construction Supervisor License CS-116503. One team designs and builds ADUs, in-law additions, major renovations, home additions and bathrooms.
Who is Guild Design Build?
Guild Design Build is the design-build side of Cape Cod Carpentry Guild Inc. It focuses on the big projects: ADUs, in-law additions, gut renovations and home additions, plus bathrooms. When a project needs a new kitchen, such as in an ADU or a whole-house renovation, we build it as part of that job. You work with one team from the first site visit to the final walkthrough. We handle design in-house, including architectural and structural design, and our team includes structural engineers, a professional land surveyor and septic design.
More about who is Guild Design Build
- What we build: accessory dwelling units (ADUs), in-law additions, major and gut renovations, home additions and bathrooms. New kitchens come as part of those jobs, not as a separate service. See ADUs, In-law additions, Major & gut renovations, Home additions and Bathrooms.
- What we don't cover here: decks, porches and railings. That work stays on our original site, capecodcarpentryguild.com (opens in a new tab), where you'll find deck and porch builds from Chatham and Harwich Port to Sandwich and Plymouth.
- Why one team: on Cape Cod, a project's real limits usually show up before anyone draws plans: septic capacity, zoning, flood zones and wetlands. A design-build team checks those first, then designs to fit them and prices the job while it's still a sketch. The full process is on How design-build works.
- Who's on the team: design is in-house, including architectural and structural design. Our team includes structural engineers, a professional land surveyor and septic design. You don't need to hire your own designer, engineer, surveyor or septic designer. We handle the whole process.
Who is Rick Conway?
Rick Conway runs the company. He has 29 years in the trades: 24 years running crews and jobs for other builders, and the last 5 owning Cape Cod Carpentry Guild Inc. The state lists him as the Responsible Person on the company's Home Improvement Contractor registration, and as the holder of Construction Supervisor License CS-116503.
More about who is Rick Conway
- Registered: the state's Contractor Hub lists Richard Conway as the Responsible Person for Cape Cod Carpentry Guild Inc., HIC #210736, status Active through January 9, 2028 (checked November 14, 2026).
- Licensed: the state's License Verification Site lists Construction Supervisor License CS-116503 in Rick's own name (Richard T Conway), status Active, through April 27, 2027 (checked November 14 and November 18, 2026).
- On the job: our project write-ups on capecodcarpentryguild.com (opens in a new tab) are written from the job site. They cover ZIP System sheathing on a Yarmouth Port gut renovation, rough electrical and plumbing in a Yarmouthport ADU, and steel beams in a Mashpee foundation repair after a car crash damaged the foundation.
- His story: [RICK_STORY]
- Experience: 29 years in the trades: 24 years running crews and jobs for other builders, and the last 5 owning Cape Cod Carpentry Guild Inc.
How does Guild Design Build relate to Cape Cod Carpentry Guild?
Same company, same licenses, same crew. Cape Cod Carpentry Guild Inc. is the legal company. Guild Design Build is its name for design-build work on ADUs, additions and major renovations. Capecodcarpentryguild.com stays live for decks, porches and exterior carpentry, and it holds the project write-ups we link to as proof.
More about how does Guild Design Build relate to Cape Cod Carpentry Guild
| Guild Design Build (guildcapecod.com) | Cape Cod Carpentry Guild (capecodcarpentryguild.com (opens in a new tab)) | |
|---|---|---|
| Legal company | Cape Cod Carpentry Guild Inc. | Cape Cod Carpentry Guild Inc. |
| HIC registration | #210736 | #210736 |
| Construction Supervisor License | CS-116503 (held by Rick Conway) | CS-116503 (held by Rick Conway) |
| Focus | ADUs, in-law additions, major and gut renovations, additions, bathrooms | Decks, porches, railings, exterior carpentry |
| Project write-ups | Links to the original site | Original posts |
Is Guild Design Build licensed and registered?
Yes. The company is a registered Massachusetts Home Improvement Contractor (HIC #210736, Active through January 9, 2028), and Rick holds Construction Supervisor License CS-116503 (Active through April 27, 2027). You can check both yourself on the state's websites.
More about is Guild Design Build licensed and registered
What each one means
- HIC registration is the state registration for contractors who work on existing, owner-occupied homes with one to four units. If you hire an unregistered contractor, the state says you can't use its arbitration program or the Guaranty Fund if something goes wrong. No exam is required.
- Construction Supervisor License (CSL) requires passing an exam on the state building code. The state says it's generally required for work on a building's structural elements. Ask your building department what your project needs.
- Kinds of CSL: the state issues a general CSL, whose scope covers construction, reconstruction, alteration, repair, removal or demolition of buildings of any use under 35,000 cubic feet, one- and two-family homes with accessory buildings, agricultural buildings, and walls under 10 feet. The "one and two family" CSL covers only one- and two-family homes, and each "specialty" CSL covers one trade, like roofing or windows and siding.
Check us yourself (we'd encourage it with any contractor)
- HIC: go to the MA Contractor Hub search (contractorhub.mass.gov) and search HIC registration number 210736. The state says the record also shows history such as complaints.
- CSL: go to the state's License Verification Site (madpl.mylicense.com/Verification) and search license number CS-116503.
A note for second-home owners: the state HIC law doesn't cover vacation or secondary homes, or new construction. That changes which state remedies you have, so read your contract carefully. More on For second-home owners.
Where is Guild Design Build based, and where do you work?
We're based in Pocasset, one of Bourne's southern villages. Our posted projects run from Pocasset to Yarmouth Port, Chatham, Mashpee, Marstons Mills and North Falmouth. Our town guides cover Barnstable, Bourne, Chatham, Falmouth, Harwich, Mashpee, Sandwich and Yarmouth.
More about where is Guild Design Build based, and where do you work
- Towns with a Guild Design Build guide: Barnstable · Bourne · Chatham · Falmouth · Harwich · Mashpee · Sandwich · Yarmouth
- Also listed on our original site: Orleans, Dennis, Eastham, Wellfleet, Pleasant Lake and Plymouth.
- Posted jobs by place (proof on capecodcarpentryguild.com (opens in a new tab)):
- Pocasset (Bourne): barn construction
- Yarmouth Port: an ADU build, a full gut ("level 3 alteration") renovation and a fireplace makeover
- Chatham: home addition framing
- Mashpee: foundation repair and a home restoration after an accident
- Marstons Mills (Barnstable): two bathroom remodels, plus window replacement and PVC trim
- North Falmouth: a 1940s porch revival
- We don't publish a street address. Project visits happen at your property.
What's it like to work with us?
We start at your property and look at the hard limits first: septic, zoning, flood zone and wetlands. Then come the design, a written proposal, permits, construction and a final walkthrough.
More about what's it like to work with us
- First visit: we walk the house and lot with you, talk through what you want, and flag anything that could reshape the project, like a septic system sized for fewer bedrooms or a flood zone. On septic, we check with you whether your system can handle the project, then work with you and your town's Board of Health to find out whether it can go ahead and what your options are. Sometimes there's a way to avoid a full new septic system, but not always.
- Design and proposal: design and pricing develop together, so you aren't surprised after the plans are done. We don't publish prices because every Cape lot and house is different. Our cost guide (What it costs) has published third-party ranges with sources.
- Permits: the state tells homeowners to make sure the registered contractor agrees to pull the building permit. If you pull it yourself, you may not be eligible for the Guaranty Fund. The permit card must stay posted at the job site until the work is done.
- Building: our project posts show the work we get right before walls close, like routing wiring and pipe through the framed walls and wrapping the shell in ZIP System sheathing for a tighter envelope.
- Full step-by-step: How design-build works.
See the work
Our best proof is the job sites. Start with the Yarmouthport ADU and the Yarmouth Port gut renovation, then browse every project on Projects.
More about see the work
- ADU, Yarmouthport: gray board-and-batten siding, white trim, new roof, Harvey windows, interior framing complete → project post (opens in a new tab)
- Full gut, Yarmouth Port: ZIP System sheathing, Vycor at the base of the walls, James Hardie board-and-batten → project post (opens in a new tab)
- Addition, Chatham: framing matched to the existing house → project post (opens in a new tab)
- Bathroom, Marstons Mills: marble walls, glass shower, double sinks in granite, built-in bench → project post (opens in a new tab)
- Foundation repair, Mashpee: excavation, concrete cutting and steel beams after a car crash damaged the foundation → project post (opens in a new tab)
CTA band: "Planning an ADU, addition or big renovation? Tell us about your house. You don't need to hire your own designer, engineer, surveyor or septic designer. We handle the whole process." → Request a proposal (Request a proposal) · Check your lot for an ADU (Check if an ADU fits your lot (free))
Frequently asked questions
Who owns Guild Design Build?
Rick Conway runs Guild Design Build, which is a brand of Cape Cod Carpentry Guild Inc.
More about this answer: Who owns Guild Design Build?
The state's Home Improvement Contractor registry lists Richard Conway as the Responsible Person for Cape Cod Carpentry Guild Inc. (HIC #210736).
Is Guild Design Build the same company as Cape Cod Carpentry Guild?
Yes. It's the same company, licenses and team. Guild Design Build is the name we use for ADUs, additions and major renovations.
More about this answer: Is Guild Design Build the same company as Cape Cod Carpentry Guild?
Capecodcarpentryguild.com stays live for decks, porches and exterior carpentry, and it hosts the project write-ups linked throughout this site.
Is Guild Design Build licensed?
Yes. The company holds Massachusetts HIC registration #210736, and Rick holds Construction Supervisor License CS-116503. Both showed Active on the state's lookups on November 14, 2026.
More about this answer: Is Guild Design Build licensed?
You can look both up yourself on the MA Contractor Hub and the state License Verification Site. Insurance: [INSURANCE_DETAILS] The state recommends asking any contractor for proof of liability and workers' compensation insurance.
What's the difference between an HIC registration and a Construction Supervisor License?
HIC registration is a state registration for working on existing owner-occupied homes and needs no exam. A CSL requires passing a building-code exam and is generally needed for structural work.
More about this answer: What's the difference between an HIC registration and a Construction Supervisor License?
The state says whether a contractor needs both depends on the scope of work. If you hire an unregistered contractor, you can't use the state's arbitration program or the Guaranty Fund.
Which Cape Cod towns do you work in?
We're based in Pocasset (Bourne). Our town guides cover Barnstable, Bourne, Chatham, Falmouth, Harwich, Mashpee, Sandwich and Yarmouth.
More about this answer: Which Cape Cod towns do you work in?
Our original site also lists Orleans, Dennis, Eastham, Wellfleet, Pleasant Lake and Plymouth. Ask us about your town. Each one has its own zoning, board of health and conservation rules, so we check yours before we design anything.
Do you still build decks and porches?
Yes, under Cape Cod Carpentry Guild. That work lives on capecodcarpentryguild.com (opens in a new tab).
More about this answer: Do you still build decks and porches?
Guild Design Build's pages focus on ADUs, in-law additions, major renovations, home additions and bathrooms. If your project mixes the two, like an addition with a new deck, one team handles both.
Why don't you publish prices?
Because a Cape Cod project's cost depends on things we can only see at your property: septic, flood zone, framing condition and scope.
More about this answer: Why don't you publish prices?
We give you a written proposal after the first visit and design stage. For a sense of the range, our cost guide (What it costs) collects published third-party figures, each with its source and date.
How long has Rick worked in the building trades?
29 years. Rick Conway spent 24 years running crews and jobs for other builders, and the last 5 owning Cape Cod Carpentry Guild Inc.
More about this answer: How long has Rick worked in the building trades?
[Rick's own sentence about where he learned the trade. Optional: until Rick supplies it, publish the short answer only.]